Burst Pipe in Your House? What to Do First
A burst pipe can release hundreds of gallons in an hour. The first fifteen minutes are about stopping the water; the next day is about getting it dried before it turns into mold.
The first fifteen minutes
- Shut off the main water valve. In most Rockwall-area homes it’s where the line enters the house, often in the garage, or in a box near the street. Find it before you need it.
- Open a faucet at the lowest point of the house to drain the remaining pressure out of the pipes.
- Cut power to wet rooms at the breaker if you can reach the panel without standing in water. If water is near the panel, stay out and call the electric utility.
- Turn off the water heater if the house will be without water for a while (gas to “pilot” or the breaker for electric).
- Move valuables and electronics out of the water and lift furniture off wet floors.
Frozen pipes after a North Texas freeze
North Texas homes aren’t built for long hard freezes. During the February 2021 winter storm, pipes split across the region in exterior walls, attics, garages and outdoor hose bibs, and many leaks only showed when the pipes thawed.
- Before a hard freeze: drip faucets on exterior walls, open cabinet doors under sinks, cover outdoor faucets and know where your main shutoff is.
- If a pipe is frozen but not leaking: keep the faucet open and warm the pipe gently with a hair dryer. No open flame.
- If the ceiling sags or bulges: stay out from under it. It’s holding water and can come down.
Document before you clean
Take photos and video of the source, the standing water and every affected room before anything is moved. Keep the broken pipe section if a plumber replaces it. Make a list of damaged items. Then call your insurance agent. Most Texas homeowners policies treat a sudden pipe burst differently from a slow leak, and early documentation makes the claim easier. More in insurance and water damage in Texas.
Why the first 24 to 48 hours matter
Water from a supply line starts clean, but it doesn’t stay clean once it sits in carpet, pad and drywall. Within a day or two it can grow bacteria and mold can start on wet materials. Fans and opening windows dry the surface but not the inside of walls, the subfloor or the slab under the flooring.
Professional drying uses extraction, dehumidifiers and air movers, with moisture meters to confirm the framing is dry before walls are closed up. See water damage restoration.
Is it clean water or sewage?
Water from a supply pipe, water heater or ice maker line is clean to start with. Water from a toilet, a floor drain or the sewer line is not, and needs to be handled as sewage. If you aren’t sure, treat it as contaminated and see sewage backup cleanup.
Water on the floor or coming through the ceiling? Shut off the main, then call (972) 630-3491 for water extraction and drying in Rockwall, Heath, Fate and McLendon-Chisholm.